| XY Move Speed
(with full cutting force) |
Variable, max. 600”/min. (15.24m/min.) |
| Z Move Speed (with
full cutting force) |
Variable, max. 360”/min. (9.14m/min.) |
| XY Positioning Speed |
Variable, max.
1500”/min. (38.1m/min.) |
| Z Positioning
Speed |
Variable, max. 900”/min. (22.86m/min.) |
| Step Resolution |
0.0005” (0.0127mm) |
| Positional
Accuracy (no load) |
+/-
0.003in (0.076mm) |
| Linear Cutting
Force |
Approximately 150 lbs. (68 Kg) |
| X and Y Axis Drive System |
Rack and Pinion |
| Z Axis Drive
System |
Rack
and Pinion |
| Input Voltage |
110 volt (30 amp); or
220 volt (15 amp) [Single phase, 50-60Hz] VOLTAGE must be specified at
time of purchase. The PRSalpha requires a fused disconnect installed by
a licensed electrician. |
